GE CardioSoft PC Based 12 Lead Resting ECG System
CardioSoft 12 Lead ECG System
CardioSoft interpretive PC software
100 Ambu SUPAtab ECG electrodes
10 Ambu crocodile clips
Protective hard carry case
In Stock
| Brand | |
|---|---|
| Condition |
Description
The GE CardioSoft PC Based 12 Lead Interpretive resting ECG System is a high performance ECG cable and PC software package. CardioSoft utilises ‘Hook Up Advisor’, which combined with the Marquette® 12SL ECG analysis programme, gives the most accurate automated interpretation, helping the clinician to make fast and effective healthcare decisions.
Using the included Intelligent Integration Interface (I3) software*, the Cardiosoft system is fully integrated with all the leading NHS clinical systems from EMIS, TPP and Vision. The software automatically files a high quality ECG report (as a PDF) and a coded result to the patient’s record on test completion. CardioSoft is also compatible with the ECG On-Demand with i3 ECG interpretation service from Technomed.
The ECG cable connects directly to a USB port of any computer making it perfect for the busy GP practice where multiple rooms are used for ECG testing. The supplied CardioSoft software can be installed on as many consulting room computers as required. For domiciliary visits, CardioSoft can also be installed on a laptop computer.
MUSE systems compatible
PDF export of final reports
Microsoft® Word export of configured reports
XML or Excel® export of specified data
EMR connectivity
Built-in lead-fail detection and lead prep impedance measurement
Sampling rate: 4,000 samples per second
Dynamic range: 320 mV, ±10 mV signal superimposed on ±150 mV DC offset
Resolution: 4.88 μV/LSB @ 500 Hz
Noise: <15 μV peak-to-peak noise over 0.01 to 150 Hz (-3dB) bandwidth
ECG analysis frequency: 500 Hz
High pass filter: 0.01 (or 0.05 Hz, special use) with DC offset control
Low pass filter: 20, 40, 100, 150 Hz (selectable)
Line filter: 50.0 or 60.0 Hz notch filter (selectable)
Baseline correction: Cubic Spline algorithm
Impedance: >10 M Ohms @ 10 Hz, defibrillator protected
Patient leakage: <10 μA
Pace detect: Orthogonal LA, LL and V6; 750 μV @ 50 μs
Monitored leads: 12
Displayed leads: Number on screen 3, 6 or 12
Display format: 4 x 2.5, 4 x 2.5 + 1 rhythm, 2 x 6, 6 rhythm, 3 rhythm
Display speeds: 25, 50 mm/s
Display sensitivity/gain: 2.5, 5, 10, 20, 40 mm/mV
PC Requirements: Operating System: Windows 7 Professional (64-bit) or Windows 10 (64-bit), Processor: P4 class, 2 GHz min, RAM: 2 GB SDRAM min, 4GB or above recommended, Hard drive: Recommended: 80 GB or greater; minimum 4 GB free space (depending on the number of tests to save), Graphics: Minimum SXGA (1280 x 1024) resolution and 64K colors., USB: One free USB port is required
Additional information
| Brand | |
|---|---|
| Condition |
